Product information
Klüber Summit® Varnasolv Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems
Klüber Summit Varnasolv, Art. No.: 050017, en Edition 04.07 MA-TM/HK Benefits for your
application:
— Dissolves varnish and carbon deposits, thus reducing maintenance and cleaning costs
– no dismantling of systems needed prior to cleaning
— Used during operation, no downtime of machines for cleaning
— Easy application due to the neutral behavior towards seals, when added to the compressor oil on 1 to 10 basis **
— Reduced operating and maintenance costs due to higher efficiency (e.g. compressor) and longer service life of the fresh oil fill
Application
Klüber Summit Varnasolv has been especially designed for cleaning screw-type compressors, hydraulic systems, gears and other oil circulating systems like calenders. The conditioner can be used for oils based on mineral oil, synthetic hydrocarbon, ester oil and polyglycol. Using mineral oils in oil-injected screw-type and sliding vane compressors may lead to varnish and carbon buildup in the entire oil circuit or form sticky residues on valves and hot surfaces in hydraulic systems. This often results in increased energy consumption, sticky valves, clogged oil lines and filters and increased downtime due to maintenance. Klüber Summit Varnasolv is a concentrated conditioner fluid which dissolves varnish and carbon buildups during operation and keeps them suspended in the compressor oil. Therefore, it is no longer necessary to dismantle the system for cleaning. The oil containing the residues is completely drained before refilling the unit with fresh oil.
Description
Klüber Summit Varnasolv is a concentrated conditioner fluid containing synthetic ester oil and cleaning additives. It is miscible with mineral oils, synthetic hydrocarbons, ester oils and polyglycols.
Application notes
Add Klüber Summit Varnasolv to the oil fill on 1 to 10 basis. Be sure to drain enough compressor oil to allow for the additional quantity. Let the unit continue operating for an additional 40 to 60 hours at an operating oil temperature of 70 – 80°C, if possible, to dissolve all varnish and carbon buildups or sticky residues. Then immediately drain the unit while the oil is still hot. Make sure the oil is also removed from tubes, filter housings and dead corners, because the used oil fill may severely affect the fresh oil. Then exchange filters and oil separators and refill the unit with the fresh oil. Especially when using Klüber Summit Varnasolv in gears and other highly loaded units please take the viscosity and the wear protection of the oil/Varnasolv mixture into consideration when adding Varnasolv to the oil fill. Your contact persons at Klüber Lubrication would be pleased to assist you in cleaning your machines with Klüber Summit Varnasolv.
Product information
Klüber Summit® Varnasolv
Concentrated, synthetic conditioner for compressors, hydraulic systems, gears and other oil circulation systems Lubrication is our world With more than 2000 products available around the world, you can be sure that Klüber has the right product for your application. Please contact Klüber Lubrication specialists world wide to assist you in all matters regarding lubrication. www.seanna-tec.com
Klüber Lubrication München KG, Geisenhausenerstraße 7, 81379 München, Germany, phone +49 89 7876-0, fax +49 89 7876-333.
The data in this product information is based on our general experience and knowledge at the time of printing and is intended to give information of possible applications to a reader with technical experience. It constitutes neither an assurance of product properties nor does it release the user from the obligation of performing preliminary tests with the selected product. We recommend contacting our Technical Consulting Staff to discuss your specific application. If required and possible we will be pleased to provide a sample for testing. Klüber products are continually improved. Therefore, Klüber Lubrication reserves the right to change all the technical data in this product information at any time without notice.
Klüber Lubrication, a company of the Freudenberg Group
Publisher and Copyright: Klüber Lubrication München KG. Reprints, total or in part, are permitted only prior consultation with Klüber Lubrication München KG and if source is indicated and voucher copy is forwarded.
Minimum shelf life The minimum shelf life is approx. 60 months if the product is stored in its unopened original container in a dry, frost-free place.
Pack sizes
3.8l pail
19 l plastic canister
208 l steel drum
Material Safety Data Sheets Material safety data sheets can be downloaded or requested via our website www.seanna-tec.com. You may also obtain them through your contact person at Klüber Lubrication.
Product data
Klüber Summit Varnasolv Color, aspect light yellow, clear
Density, DIN 51757, [g/cm3], 20°C, approx. 0.98
Kinematic viscosity, DIN 51562, part 1 at 40°C, [mm²/s], 65-85
Flash point, DIN ISO 2592, [°C] ≥ 165
** Based on our current experience. Owing to the many different elastomer compositions, we recommend the user checking their compatibility under conditions similar to actual use.